Dell PowerEdge 4200 Series Panduan Instalasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell PowerEdge 4200 Series. Dell PowerEdge 4200 Series 28 halaman. Dell poweredge 4200 servers: installation guide
Juga untuk Dell PowerEdge 4200 Series: Pemasangan Rak (37 halaman), Pemasangan Rak (34 halaman)
Halaman Cetak
1-2
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
8-32 x 0.5-inch hex-head,
thread-forming screws (4)
Figure 1-1. Tower Kit Contents
Before You Begin
Before you begin removing your system from the rack, carefully read the safety
precautions and tool requirements in the following sections.
Important Safety Information
Follow these safety precautions when removing your system from the rack.
Kit Restrictions
This tower kit is intended to be installed by trained service technicians.
Rack Stabilizer Feet
WARNING: Removing PowerEdge systems from a Dell rack without the
front and side stabilizer feet installed could cause the rack to tip over,
potentially resulting in bodily injury under certain circumstances.
Therefore, always install the stabilizer feet before removing components
from the rack.
rubber feet (4)
plastic filler plugs (18)