Dell PowerEdge 4200 Series Installatiehandleiding - Pagina 8
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerEdge 4200 Series. Dell PowerEdge 4200 Series 28 pagina's. Dell poweredge 4200 servers: installation guide
Ook voor Dell PowerEdge 4200 Series: Installatie rek (37 pagina's), Installatie rek (34 pagina's)
Pagina afdrukken
1-2
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
8-32 x 0.5-inch hex-head,
thread-forming screws (4)
Figure 1-1. Tower Kit Contents
Before You Begin
Before you begin removing your system from the rack, carefully read the safety
precautions and tool requirements in the following sections.
Important Safety Information
Follow these safety precautions when removing your system from the rack.
Kit Restrictions
This tower kit is intended to be installed by trained service technicians.
Rack Stabilizer Feet
WARNING: Removing PowerEdge systems from a Dell rack without the
front and side stabilizer feet installed could cause the rack to tip over,
potentially resulting in bodily injury under certain circumstances.
Therefore, always install the stabilizer feet before removing components
from the rack.
rubber feet (4)
plastic filler plugs (18)