Dell PowerEdge 4210 Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell PowerEdge 4210. Dell PowerEdge 4210 24 halaman. Cabling poweredge t610
Juga untuk Dell PowerEdge 4210: Manual (20 halaman), Manual (20 halaman), Manual (17 halaman), Manual (12 halaman), Manual (10 halaman), Manual (10 halaman), Manual (9 halaman), Manual (9 halaman), Manual (10 halaman), Manual (12 halaman), Manual (11 halaman), Manual (8 halaman)

Halaman Cetak

F i g u r e 1 - 1 . R a c k K i t C o n t e n t s

cable-management arm

Rack Requirements

The rack kit is designed for use in a Dell rack with an extended-depth back door. If you

have a Dell rack cabinet with a white finish, check that the back door does not contain

flush-mounted glass. If it does, you will need to order a new rack door from Dell before

installing your new system in the rack.

NOTICE: This rack kit is intended to be installed in a Dell rack by trained service technicians.

If you install the kit in any other rack, be sure that the rack meets the specifications of American

National Standards Institute (ANSI)/Electronic Industries Association (EIA) standard

ANSI/EIA-310-D-92, International Electrotechnical Commission (IEC) 297, and Deutsche

Industrie Norm (DIN) 41494. One rack kit is required for each system that is installed in a rack.

1-2

Ra c k I n st allat io n G u ide

cable tray

6-32 x 0.25-inch

flat-head Phillips

screws (2)

slide assemblies with

mounting brackets (2)

6-32 x 0.25-inch

hex-head taptite

screws (3)

rack template