Dell PowerEdge 4210 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Dell PowerEdge 4210. Dell PowerEdge 4210 24 halaman. Cabling poweredge t610
Juga untuk Dell PowerEdge 4210: Manual (20 halaman), Manual (20 halaman), Manual (17 halaman), Manual (12 halaman), Manual (10 halaman), Manual (10 halaman), Manual (9 halaman), Manual (9 halaman), Manual (10 halaman), Manual (12 halaman), Manual (11 halaman), Manual (8 halaman)

Halaman Cetak
Dell PowerEdge 4210 Panduan Instalasi
CAUTION: After installing systems in a rack, never pull more than one system
out of the rack on its slide assemblies at one time. The weight of more than one
extended system could cause the rack to tip over and cause injury.
The stabilizer feet help prevent the rack from tipping over when a system or other
component is pulled out of the rack with the slide assemblies fully extended. Refer to the
documentation provided with the rack cabinet for instructions on installing and anchoring
the stabilizer feet.

Recommended Tools and Supplies

To install the rack kit components, you need the following tools:
•
A #2 Phillips-head screwdriver
•
Installation template (provided with kit)
•
Mechanical lifting platform (optional)
•
Masking tape or a felt-tip pen (for use in marking the mounting holes)

Installation Tasks

Installing the rack kit and the system into a rack cabinet involves the following tasks:
•
Removing the rack doors
•
Marking the rack
•
Installing the slide assemblies in the rack
•
Installing the system in the rack
•
Installing the cable tray
•
Installing the cable management arm
•
Replacing the rack doors
1-4
Ra c k I n st allat io n G u ide