Dell POWEREDGE 4300 Panduan Petunjuk Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Server Dell POWEREDGE 4300. Dell POWEREDGE 4300 12 halaman. System board upgrade
Juga untuk Dell POWEREDGE 4300: Informasi Instalasi (6 halaman), Panduan Instalasi (28 halaman), Pemasangan Rak (37 halaman), Panduan Instalasi Upgrade (14 halaman), Pemasangan Rak (34 halaman), Panduan Peningkatan (23 halaman), Panduan Peningkatan (24 halaman), Manual Penggantian (3 halaman), Informasi Instalasi (6 halaman), Panduan Instalasi (14 halaman)

Reinstall the support panel.

If you installed the GSO-slot SMB connector, route the connector and cable

through the cutout in the support panel (see Figure 5). Ensure that the connector

and cable are positioned properly so that they do not bind between the rubber

standoffs.

support panel

cutout

thumbscrews (2)

support panel

% & ' ((

10. Replace the computer cover.

You are now ready to connect the external SMB cable from the SDS 100 storage sys-

tem. For more information on connecting the storage system to a host computer, see

Chapter 2 of the Dell PowerEdge SDS 100 Storage System Installation and Service

Guide.

SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions

SMB

connector