Dell POWEREDGE 4300 Handleiding voor installatie-instructies - Pagina 7

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Dell POWEREDGE 4300. Dell POWEREDGE 4300 12 pagina's. System board upgrade
Ook voor Dell POWEREDGE 4300: Installatie-informatie (6 pagina's), Installatiehandleiding (28 pagina's), Installatie rek (37 pagina's), Upgrade installatiehandleiding (14 pagina's), Installatie rek (34 pagina's), Upgrade handleiding (23 pagina's), Upgrade handleiding (24 pagina's), Vervangingshandleiding (3 pagina's), Installatie-informatie (6 pagina's), Installatiehandleiding (14 pagina's)

Reinstall the support panel.

If you installed the GSO-slot SMB connector, route the connector and cable

through the cutout in the support panel (see Figure 5). Ensure that the connector

and cable are positioned properly so that they do not bind between the rubber

standoffs.

support panel

cutout

thumbscrews (2)

support panel

% & ' ((

10. Replace the computer cover.

You are now ready to connect the external SMB cable from the SDS 100 storage sys-

tem. For more information on connecting the storage system to a host computer, see

Chapter 2 of the Dell PowerEdge SDS 100 Storage System Installation and Service

Guide.

SMB Connector and SCSI Cable Strain-Relief Kit Installation Instructions

SMB

connector