Dell PowerEdge 860 Panduan Servis - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Servis untuk Server Dell PowerEdge 860. Dell PowerEdge 860 37 halaman. Sas/raid controller installation
Juga untuk Dell PowerEdge 860: Pembaruan Informasi (14 halaman), Instal Manual (28 halaman), Panduan Petunjuk Instalasi (7 halaman)

Dell PowerEdge 860 Panduan Servis
Back to Contents Page
  Module Cover
Dell™ Vostro™ A840/A860 Service Manual 
  Removing the Module Cover
  Replacing the Module Cover
 
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as a connector on the back of the computer).
 Removing the Module Cover
 
1. Follow the procedures in
Before You
 
2. Turn the computer over.
 
3. Remove the two screws from the module cover.
1
module cover screw (2)
 
4. Lift the module cover away from the computer.
 Replacing the Module Cover
 
1. Replace the module cover.
 
2. Replace the two screws on the module cover.
 
3. Slide the battery into the battery bay, until it clicks into place.
Back to Contents Page
 
Begin.
2
module cover