Dell PowerEdge FD332 Panduan Pemilik - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Server Dell PowerEdge FD332. Dell PowerEdge FD332 46 halaman.
Juga untuk Dell PowerEdge FD332: Memulai (2 halaman)
NOTE:
It is recommended that you always use an antistatic mat and antistatic strap while working on components inside the
system.
Before working inside your system
1
Turn off the compute sled(s) to which the storage sled is mapped, by using the CMC, iDRAC, or the power button on the compute
sled.
When the sled is turned off, its front panel power indicator is off.
The storage sled also turns off.
2
Remove the storage sled from the enclosure.
3
Install the I/O connector cover.
Related link
Removing a storage sled
After working inside your system
1
Remove the I/O connector cover.
2
Install the storage sled in the enclosure.
3
Turn on the compute sled(s) to which the storage sled is mapped.
The storage sled turns on after the compute sled is turned on.
Related link
Installing a storage sled
Recommended tools
You may need the following items to perform the procedures in this section:
•
#1 and #2 Phillips screwdrivers
•
T15 Torx driver
Storage sled
Removing a storage sled
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION:
Removing the storage sled from the enclosure when the storage sled is powered on results in loss of data.
CAUTION:
To prevent damage to the storage sled locks, use a #2 Phillips screwdriver to turn the sled locks to lock or unlock
positions.
1
Ensure that you read the Safety instructions provided in this document.
2
Turn off the compute sled(s) to which the storage sled is mapped, by using the CMC, iDRAC, or the sled power button.
3
Keep the #2 Phillips screwdriver ready.
18
Installing and removing storage sled components