Avue High Speed dome Camera Series Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan Avue High Speed dome Camera Series. Avue High Speed dome Camera Series 15 halaman. High speed dome camera series

Halaman Cetak

3.PACKING LIST

Indoor

Series

Core Unit

Indoor Roof-Mount

1 Piece

base platte

1 piece

Outdoor

Series

Out-Door housing

Core Unit

with sun.shield and

1 Piece

cover

1 piece

Outdoor

Series

Core Unit

Out-Door housing

1 Piece

with sun.shield and

cover

1 piece

WARNING:

The transparent cover part is sensitive and should

be handled with care. Do not touch or rub the surface in any way

with the protection foil.Inproper cleaning method will cause

permanent scratches on the cover and cause unclear image or

focusing error of the camera. For Cleaning the cover, please

replace the original first with the spare cover, and wash it by

diving into warm water with non-corrosive cleaning solution.

Unpacking

The speed dome is packed with protection. please take

out the core unit carefully. In case of transportation

please use the original packing box.

Some models may not be available in your country, please contact VIDO distributor for more details

High Speed dome

Camera Series

USER'S MANUAL

Instruction and

operation manual

1 piece

High Speed dome

Camera Series

USER'S MANUAL

Instruction and

Spare dome cover

operation manual

1 piece

High Speed dome

Camera Series

USER'S MANUAL

Spare dome cover

Instruction and

1 piece

operation manual

1 piece

4.INSTALLATION

Safety Instructions before starting

- Do not install and operate this appliance in a flammable and explosive environment.

- Make sure that the installation is done according to the local electricity safety regulation

of your country.

- Before installation and mentainence, make sure that the appliance is disconnected

from the power source.

- Do not use any power source other than 24V AC, in order to prevent damages to this

device. For details, please refer to the section "Precaution" in previous chapter for

more details.

- Handle the device during the installation carfully. Falls or extreme vibration may cause

irrepairable damages and avoid the warranty.

- Do not install or operate the appliance near any high-voltage devices or high-voltage

cable. The safety distance should remain at least 50 m.

- To archive best image quality, its recommanded to use underground cable shielded with

steel tube. Do not install the cable without any protection.

- In a thunderstorm area or region with high inductive voltage, such as high voltage

transformer stations, it is necessary to use additional lighning-proof equipments or

lightning rob for protection.

- For outdoor installation, lightning-proof and grounding of the device should be

considered. Please refer to the industrial saftey regulation and request of your country

- Grounding of the appliance should consider anti-interference and fulfill the saftey

requirements. Do not connect the ground with short-circuited or other high-voltage

electric network.

- The resistance of down conductor should not exceed 4 Ohm, and its thickness should

be at least 25mm²

- This appliance has the lightning-proof function which can prevent damages caused by

high-voltage pulse, such as lightning strike below 1500.

- This appliance meets the Ip66 standard for water and dust proof. Do not install the in-

door model for out-door application which is not designed with water protection. Make

sure that the installation is protected from long-time water-drop or spatter, which may

damage the appliance.

- Make sure that the enviroment of installation meets the requirement of the appliance,

such as holding the weight, enough spaces for bracket and power supply.

Some products may not be available in your country, please contact our distributor for more details