Avue High Speed dome Camera Series Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avue High Speed dome Camera Series. Avue High Speed dome Camera Series 15 pagina's. High speed dome camera series

Pagina afdrukken

3.PACKING LIST

Indoor
Series
Core Unit
Indoor Roof-Mount
1 Piece
base platte
1 piece
Outdoor
Series
Out-Door housing
Core Unit
with sun.shield and
1 Piece
cover
1 piece
Outdoor
Series
Core Unit
Out-Door housing
1 Piece
with sun.shield and
cover
1 piece
WARNING:
The transparent cover part is sensitive and should
be handled with care. Do not touch or rub the surface in any way
with the protection foil.Inproper cleaning method will cause
permanent scratches on the cover and cause unclear image or
focusing error of the camera. For Cleaning the cover, please
replace the original first with the spare cover, and wash it by
diving into warm water with non-corrosive cleaning solution.
Unpacking
The speed dome is packed with protection. please take
out the core unit carefully. In case of transportation
please use the original packing box.
3
Some models may not be available in your country, please contact VIDO distributor for more details
High Speed dome
Camera Series
USER'S MANUAL
Instruction and
operation manual
1 piece
High Speed dome
Camera Series
USER'S MANUAL
Instruction and
Spare dome cover
operation manual
1 piece
1 piece
High Speed dome
Camera Series
USER'S MANUAL
Spare dome cover
Instruction and
1 piece
operation manual
1 piece
4.INSTALLATION
Safety Instructions before starting
- Do not install and operate this appliance in a flammable and explosive environment.
- Make sure that the installation is done according to the local electricity safety regulation
of your country.
.
- Before installation and mentainence, make sure that the appliance is disconnected
from the power source.
- Do not use any power source other than 24V AC, in order to prevent damages to this
device. For details, please refer to the section "Precaution" in previous chapter for
more details.
- Handle the device during the installation carfully. Falls or extreme vibration may cause
irrepairable damages and avoid the warranty.
- Do not install or operate the appliance near any high-voltage devices or high-voltage
cable. The safety distance should remain at least 50 m.
- To archive best image quality, its recommanded to use underground cable shielded with
steel tube. Do not install the cable without any protection.
- In a thunderstorm area or region with high inductive voltage, such as high voltage
transformer stations, it is necessary to use additional lighning-proof equipments or
lightning rob for protection.
- For outdoor installation, lightning-proof and grounding of the device should be
considered. Please refer to the industrial saftey regulation and request of your country
.
- Grounding of the appliance should consider anti-interference and fulfill the saftey
requirements. Do not connect the ground with short-circuited or other high-voltage
electric network.
- The resistance of down conductor should not exceed 4 Ohm, and its thickness should
be at least 25mm²
- This appliance has the lightning-proof function which can prevent damages caused by
high-voltage pulse, such as lightning strike below 1500.
- This appliance meets the Ip66 standard for water and dust proof. Do not install the in-
door model for out-door application which is not designed with water protection. Make
sure that the installation is protected from long-time water-drop or spatter, which may
damage the appliance.
- Make sure that the enviroment of installation meets the requirement of the appliance,
such as holding the weight, enough spaces for bracket and power supply.
Some products may not be available in your country, please contact our distributor for more details
4