Avue High Speed dome Camera Series Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Avue High Speed dome Camera Series. Avue High Speed dome Camera Series 15 pagina's. High speed dome camera series
Pagina afdrukken1.PRECAUTION
Refer all work related to the installaion of this product to qualified service
personnel or system installers.
Do not attemp to disassemble the appliance
To prevent electric shock, do not remove screws or cover. There are no user-
serviceable parts inside. Contact qualified service personnel for maintenance
Handle the appliance with Care
Do not strike or shake, as this may damage the appliance. It should be protected
against extreme pressure, vibration and humidity during transportation and storage.
Damages caused by improper transportation avoid the warranty.
Do not use strong or abrasive detergents when cleaning the appliance body and
transparent cover.
Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove,
use a mild detergent and wipe gently.
Do not operate the apliance beyond its specified temperature, humidity or power
source ratings.
Do not use the dome camera in an extreme environment where high temperature or
high humidity exists.
Use the
indoor models
within -10°C to +50°C(14°F to 122°F) and a humidity below
90%. The input power source is 24V AC, 50/60Hz and requires 1000mA.
Use the
outdoor models
within -20°C to +60°C(-4°F to 140°F) and a humidity below
90%. The input power source is 24V AC, 50/60Hz and requires 2500mA.
Do not expose the indoor model of dome camera to water or moisture, not try to
operate it in wet areas.
Take immediate action when the indoor speed dome becomes wet. Turn off the power
and refer servicing to qulified service personnel. Moisture may damage the appliance
and cause eletric shock.
Do not point the camera lens directly to sunlight or any strong light source.
This will cause permanent damage to the camera and avoids the warranty.
Read this user's manual carefully before operating the appliance.
Make sure that local electric safty standard are followed when using or installing the
appliance
Do not install the camera in other orientation as designed.
And do not bend or squeez the sturctiure, as this may damage the mechanic sturcture
of the appliance and avoids the warranty.
Do not touch the Cover with bare hands or any object.
These will scratch the serface and affect the image qulaity.
1
Some products may not be available in your country, please contact our distributor for more details
The high speed dome camera series are designed for in- and outdoor video
surveillance application. The integrated, motorized pan-tilt mechanic allows user to point
the camera to any position( 360° horizontal and 180° vertical). Both series can be
equipped with digital zoom camera modules, which provide zooming functon from 18 to
36 times (optical) and advanced image features.
Key features:
- 360° Pan and 180° Tilt range (90° with auto-image-flip)
- Support most well-known camera modules
- 128 preset points memory (80 can be used for auto tour function)
- 4 pattern tours
- 1 Scan tour
- Basic setup directly from Keyboard.
- Advanced setup through OSD (On Screen Display) menu.
- up to 24 privacy masking zones ( despends on camera module)
- 7 alarm input & 2 output ( 4 input & 1 output pre-wired)
- Multi-Protocol through Rs485 or coaxial cable.
- Dirction Indicator on screen
- Aluminum Alloy structure with high intensity and heat-sinking
- High-precision step-motor for flicker-less image during movement.
Camera Features:
- HighResolution with 560TVL and Wide-Dynamic*
- Interlace and Progressive Scan*
- Auto-Focus
- Auto-Iris
- Auto- Brightness control
- Auto-Balance
- IR cutter control, Day-Night mode switching.
- Auto Slow-Shutter
- Electric Image Stabilization
- Stablezoom*
Temperature monitoring and protection
- Alarm notification will be displayed once the inner temperature exceeds the limit
- In low temperature area, the dome camera will only start after the operation
temperature is reached.
- Cooling fan activity is managed by the CPU ( extends the duration)
Other features:
- Proportional pan for Focus / Speed on different zoom factor.
- Auto-resuming user-defined action, such as tour, pattern or scan after selectable idle
time.
- Power-up Action activates tour or pattern by default.
*
depends on camera module type.
Some products may not be available in your country, please contact our distributor for more details
2.FEATURES
2