Dell DX6000 Panduan Instalasi dan Konfigurasi - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Instalasi dan Konfigurasi untuk Penyimpanan Dell DX6000. Dell DX6000 35 halaman. Rack installation instructions — static rails
Juga untuk Dell DX6000: Panduan Tambahan (4 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Panduan Pengguna (46 halaman), Panduan Penyiapan dan Konfigurasi (43 halaman), Panduan Memulai (28 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Ikhtisar (19 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Referensi (12 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman)

Field

Cluster Name

Persistent Settings UUID

minreps

maxreps

Please reference the Node Configuration appendix of the DX Object Storage Advanced

Administration Guide for complete details of all DX Storage configuration options. The CSN

Console should be used for all configuration updates, but, for reference purposes, all cluster-

wide configuration parameters set for DX Storage are stored in a single configuration file (/var/opt/

caringo/netboot/cluster.cfg). This file is automatically generated and should never be manually

edited unless under direction of DX Storage support.

4.3. DX Storage User Access

The User Access page allows addition of new or updates to existing users who have write access

(administrators) to the DX Storage SNMP MIB and the DX Storage admin console. By default the

console gives read access to all users and an administrative user with the username of 'admin'

and a password of 'dell' is created on the system. Users can be deleted from the list by clicking the

Description

The read-only name of the cluster that was

specified during the initial network configuration

process.

Use this field to enter the UUID displayed in

the settings popup of the DX Storage admin

console the first time a settings change is

made. This will ensure the settings will persist

across reboots.

The minimum number of stream instances that

must be kept in the cluster. This is required to

be 1 or higher. 2 is recommended and provided

as the default value.

The maximum number of stream instances that

can be specified in the cluster. This is required

to be 1 or higher and must equal or exceed the

value of minreps.

Version 2.0

December 2010