Dell DX6000 Panduan Referensi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Penyimpanan Dell DX6000. Dell DX6000 12 halaman. Rack installation instructions — static rails
Juga untuk Dell DX6000: Panduan Tambahan (4 halaman), Petunjuk Pemasangan Perangkat Keras (2 halaman), Panduan Pengguna (46 halaman), Panduan Penyiapan dan Konfigurasi (43 halaman), Panduan Instalasi dan Konfigurasi (35 halaman), Panduan Memulai (28 halaman), Pemberitahuan (28 halaman), Pemberitahuan (20 halaman), Ikhtisar (19 halaman), Panduan Konfigurasi (9 halaman), Panduan Konfigurasi (9 halaman), Catatan Rilis (8 halaman), Panduan Konfigurasi (7 halaman), Catatan Rilis (6 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Instalasi (2 halaman)

Halaman Cetak
Dell DX6000 Panduan Referensi
Dell DX Object Storage – File Gateway Architectural Reference

Specific CFS Configurations

CFS configurations front-end a DX Object Storage cluster that has a CSN and at least two storage nodes.
There are two types of CFS configurations offered – single server (no failover) and high availability
(failover). A failover solution is recommended in environments that require high performance and/or
have large file system configurations.

Single-server Configuration

The minimal CFS configuration is a single CFS server the uses internal storage for storing the spooled
data and namespace. This configuration is recommended when CFS failover is not required and when
the spooled data and namespace capacity requirements are less than 1TB.

Hardware

(1) PowerEdge R410 server
Chassis: Up to four Hot-Plug Hard Drives, LCD diagnostics
o
Processor(s): 2 x E5620, 2.4GHz 12M Cache, Turbo, HT, 1066MHz Max Mem
o
Memory Configuration: 24GB Memory (6x4GB), 1066MHz Dual Ranked RDIMMs for
o
Processors, Optimized
HDD Configuration: RAID1/RAID1 hard drive configuration
o
Hard Drives:
o
Primary Controller: SAS 6.iR SAS internal RAID adapter for Hot Plug Configuration, PCI-
o
Express
PSU: 500Watt Redundant power supplies
o
Embedded Management: iDRAC6 Enterprise
o
Network Adapter: Broadcom NetXtreme II 5709 Gigabit NIC w/TOE & iSOE, Quad Port,
o
Copper, PCIe-4
DVD-ROM Drive
o
Operating System: RHEL 6 X64 Basic with 3 Year Subscription
o

Network

The CFS server is configured with one Broadcom dual port BCM 5716 controller and one Broadcom quad
port NetExtreme II 5709 GbE controller for a total of six GbE ports. The recommended network port
allocation for a single CFS configuration is:
Connect NIC ports 0 and 1 to the CIFS/NFS network.
Connect NIC ports 3 thru 5 to the DX Storage Cluster network.
(2) 500GB 7.2K RPM Near-Line SAS 3.5in HDD for OS and application
(2) 1TB 7.2K RPM Near-Line SAS 3.5in HDD for spooled data and namespace
Page 4