Dell EqualLogic PS Series Pemeliharaan Perangkat Keras - Halaman 29
Jelajahi secara online atau unduh pdf Pemeliharaan Perangkat Keras untuk Penyimpanan Dell EqualLogic PS Series. Dell EqualLogic PS Series 46 halaman. Storage arrays
Juga untuk Dell EqualLogic PS Series: Menyiapkan (2 halaman), Panduan Pemilik Perangkat Keras (50 halaman), Panduan Pemilik Perangkat Keras (48 halaman)
Halaman Cetak
PS5000 Hardware Maintenance
•
Disconnect any serial or network cables attached to the control module. If you
have a dual control module array, you may want to re-attach the network
cables to the functioning control module to ensure uninterrupted data access.
To remove a control module, follow the instructions in Figure 3-5.
Note: If you are removing a failed control module, you must remove the compact
flash card from the failed control module, as described in Replacing the
Compact Flash Card on page 3-12. Then, install the card in the
replacement control module. This will ensure that the new control module
is running the correct firmware.
Figure 3-5: Removing a Control Module
Maintaining Control Modules
3–9