Dell EqualLogic PS Series Manutenzione dell'hardware - Pagina 29
Sfoglia online o scarica il pdf Manutenzione dell'hardware per Immagazzinamento Dell EqualLogic PS Series. Dell EqualLogic PS Series 46. Storage arrays
Anche per Dell EqualLogic PS Series: Impostazione (2 pagine), Manuale d'uso dell'hardware (50 pagine), Manuale d'uso dell'hardware (48 pagine)
Stampa la pagina
PS5000 Hardware Maintenance
•
Disconnect any serial or network cables attached to the control module. If you
have a dual control module array, you may want to re-attach the network
cables to the functioning control module to ensure uninterrupted data access.
To remove a control module, follow the instructions in Figure 3-5.
Note: If you are removing a failed control module, you must remove the compact
flash card from the failed control module, as described in Replacing the
Compact Flash Card on page 3-12. Then, install the card in the
replacement control module. This will ensure that the new control module
is running the correct firmware.
Figure 3-5: Removing a Control Module
Maintaining Control Modules
3–9