Dell EqualLogic PS5500 Manual Perangkat Keras - Halaman 13
Jelajahi secara online atau unduh pdf Manual Perangkat Keras untuk Penyimpanan Dell EqualLogic PS5500. Dell EqualLogic PS5500 50 halaman. Equallogic ps series iscsi storage arrays with microsoft windows server failover clusters
Juga untuk Dell EqualLogic PS5500: Panduan Pemeliharaan (8 halaman)
Halaman Cetak
Figure 4. Example of Network Cabling Connection
1. public network
2. cluster node 1
3. public network adapter
4. private network adapter
For Public Network
Any network adapter supported by a system running TCP/IP may be used to connect to the public network segments.
You can install additional network adapters to support additional public network segments or to provide redundancy in
the event of a faulty primary network adapter or switch port.
For Private Network
The private network connection to the nodes is provided by a different network adapter in each node. This network is
used for intra-cluster communications. The following table describes the two possible private network configurations.
Method
Network switch
Point-to-Point (two-node
clusters only)
Hardware Components
Gigabit or 10 Gigabit Ethernet
network adapters and switches
Copper Gigabit network adapters
with RJ-45 connectors
Copper 10 Gigabit Ethernet network
adapters with RJ-45 connectors
Copper 10 Gigabit Ethernet network
adapters with SFP+ connectors
5. private network
6. cluster node 2
Connection
Depending on the hardware, connect the CAT5e
CAT6, CAT6a, or CAT7 cables, the multi-mode
optical cables with Local Connectors (LCs), or the
twinax cables from the network adapters in the
nodes to a switch.
Connect a CAT5e or better (CAT6, CAT6a, or CAT7)
Ethernet cable between the network adapters in
both nodes.
Connect a CAT6 or better (CAT6a or CAT7) Ethernet
cable between the network adapters in the nodes.
Connect a twinax cable between the network
adapters in both nodes.
13