Dell PowerVault 122T LTO Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyimpanan Dell PowerVault 122T LTO. Dell PowerVault 122T LTO 40 halaman. Lto autoloader
Juga untuk Dell PowerVault 122T LTO: Buku Pegangan (28 halaman), Panduan Pengguna (42 halaman)
Halaman Cetak
Firmware Revision
This option displays the revision of the firmware currently installed in the autoloader.
NOTE: The tape drive and autoloader firmware are a single image, but the image may display as three firmware numbers on the front
panel: Drive SCSI Controller, Robotics Controller Firmware, and Robotics SCSI Controller Firmware.
To use this option, follow these steps:
1. From the Home screen or main menu, press + or - until Information appears on the top line of the LCD screen, and then press Enter to access the
available options.
2. Press + or - until Firmware Rev appears on the LCD screen.
3. The LCD screen displays the revision of the firmware currently installed in the autoloader.
NOTE: After a firmware update, the firmware revision displayed on the LCD will not be updated until the autoloader is power cycled.
4. Press Cancel when finished.
Back to Contents Page