Dell PowerVault 122T LTO 사용자 설명서 - 페이지 5

{카테고리_이름} Dell PowerVault 122T LTO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault 122T LTO 40 페이지. Lto autoloader
Dell PowerVault 122T LTO에 대해서도 마찬가지입니다: 핸드북 (28 페이지), 사용자 설명서 (42 페이지)

페이지 인쇄
Dell PowerVault 122T LTO 사용자 설명서

Firmware Revision

This option displays the revision of the firmware currently installed in the autoloader.
NOTE: The tape drive and autoloader firmware are a single image, but the image may display as three firmware numbers on the front
panel: Drive SCSI Controller, Robotics Controller Firmware, and Robotics SCSI Controller Firmware.
To use this option, follow these steps:
1. From the Home screen or main menu, press + or - until Information appears on the top line of the LCD screen, and then press Enter to access the
available options.
2. Press + or - until Firmware Rev appears on the LCD screen.
3. The LCD screen displays the revision of the firmware currently installed in the autoloader.
NOTE: After a firmware update, the firmware revision displayed on the LCD will not be updated until the autoloader is power cycled.
4. Press Cancel when finished.
 
Back to Contents Page