Dell PowerVault 160T LTO2 Buku Pegangan - Halaman 19

Jelajahi secara online atau unduh pdf Buku Pegangan untuk Penyimpanan Dell PowerVault 160T LTO2. Dell PowerVault 160T LTO2 28 halaman. Dell lto media handbook

Halaman Cetak

10 Stuck Tapes

There is a good possibility that a stuck tape was generated by dropped or damaged media. Different drives will

react differently if damaged media is inserted. Some may eject a tape and some tapes may become permanently

stuck in the drive and require the drive to be returned. Most LTO drives have a capability to reset the drive in the

event of a stuck tape or other non-responsive drive issues. Attempting this drive reset may or may not help in

removing a stuck tape.

Note: Dell PowerEdge Diagnostics also includes a Media Eject test that can be run to force an eject on a tape.

Dell PowerVault 110T LTO

Dell PowerVault 110T LTO-1

Dell PowerVault 110T LTO-2-L

(Certance)

Dell PowerVault 110T LTO-2-L

(Tandberg)

Dell PowerVault 110T LTO-2

Dell PowerVault 110T LTO-3

Dell LTO Media Handbook

How to perform a device reset on Dell PowerVault 110T LTO

Insert a paper clip into the reset hole on the front panel of the drive

Press and hold the Eject button for more than 5 seconds and release the Eject button –

press Eject again to eject tape

Press and hold the Eject button for more than 5 seconds. The tape should eject within 40

seconds.

Press and hold the Eject button for 6 sec. The drive enters "Service mode" shown by all

LED's flashing slowly. Press Eject twice, the Activity LED flashes fast, then double-click

the Eject button.

Press and hold the Eject button for more than 10 seconds and release the Eject button –

press Eject again to eject tape.

Press and hold the Eject button for more than 10 seconds and release the Eject button -

press Eject again to eject tape

drives

Page 19