Dell PowerVault 160T LTO2 Справочник - Страница 19

Просмотреть онлайн или скачать pdf Справочник для Хранение Dell PowerVault 160T LTO2. Dell PowerVault 160T LTO2 28 страниц. Dell lto media handbook

10 Stuck Tapes

There is a good possibility that a stuck tape was generated by dropped or damaged media. Different drives will

react differently if damaged media is inserted. Some may eject a tape and some tapes may become permanently

stuck in the drive and require the drive to be returned. Most LTO drives have a capability to reset the drive in the

event of a stuck tape or other non-responsive drive issues. Attempting this drive reset may or may not help in

removing a stuck tape.

Note: Dell PowerEdge Diagnostics also includes a Media Eject test that can be run to force an eject on a tape.

Dell PowerVault 110T LTO

Dell PowerVault 110T LTO-1

Dell PowerVault 110T LTO-2-L

(Certance)

Dell PowerVault 110T LTO-2-L

(Tandberg)

Dell PowerVault 110T LTO-2

Dell PowerVault 110T LTO-3

Dell LTO Media Handbook

How to perform a device reset on Dell PowerVault 110T LTO

Insert a paper clip into the reset hole on the front panel of the drive

Press and hold the Eject button for more than 5 seconds and release the Eject button –

press Eject again to eject tape

Press and hold the Eject button for more than 5 seconds. The tape should eject within 40

seconds.

Press and hold the Eject button for 6 sec. The drive enters "Service mode" shown by all

LED's flashing slowly. Press Eject twice, the Activity LED flashes fast, then double-click

the Eject button.

Press and hold the Eject button for more than 10 seconds and release the Eject button –

press Eject again to eject tape.

Press and hold the Eject button for more than 10 seconds and release the Eject button -

press Eject again to eject tape

drives

Page 19