Dell PowerVault 224F Panduan Instalasi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penyimpanan Dell PowerVault 224F. Dell PowerVault 224F 24 halaman. Dell powervault 110t dlt vs160 tape drive - user's guide
Juga untuk Dell PowerVault 224F: Panduan Pengguna (23 halaman), Panduan Pengguna (39 halaman)
Halaman Cetak
support.dell.com
4.
Tighten the two captive screws on the back of the controller.
5.
Connect the drive and host channels according to your planned configuration.
For detailed information about installing and using the Dell OpenManage Array
Manager, see your Dell OpenManage Array Manager User's Guide or go to
http://support.dell.com/docs/software/marb/.
The system normally takes a few minutes to boot.
Conditioning the Battery
Before beginning normal operations, Dell recommends that you condition the battery
for maximum longevity. The battery requires six hours to be fully charged.
NOTE: During conditioning, the controller is in write-through cache mode. This may
slow normal operations; therefore, schedule this operation accordingly.
LED Indicators
Figure 1-3 shows the LED indicators on the Dell Fibre Disk RAID Controller.
Upgrade Installation Guide
1-5