Dell PowerVault 224F Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dell PowerVault 224F. Dell PowerVault 224F 24 pagina's. Dell powervault 110t dlt vs160 tape drive - user's guide
Ook voor Dell PowerVault 224F: Gebruikershandleiding (23 pagina's), Gebruikershandleiding (39 pagina's)

Dell PowerVault 224F Installatiehandleiding
support.dell.com
4.
Tighten the two captive screws on the back of the controller.
5.
Connect the drive and host channels according to your planned configuration.
For detailed information about installing and using the Dell OpenManage Array
Manager, see your Dell OpenManage Array Manager User's Guide or go to
http://support.dell.com/docs/software/marb/.
The system normally takes a few minutes to boot.

Conditioning the Battery

Before beginning normal operations, Dell recommends that you condition the battery
for maximum longevity. The battery requires six hours to be fully charged.
NOTE: During conditioning, the controller is in write-through cache mode. This may
slow normal operations; therefore, schedule this operation accordingly.

LED Indicators

Figure 1-3 shows the LED indicators on the Dell Fibre Disk RAID Controller.
Upgrade Installation Guide
1-5