Dell PowerVault MD3060e Series Panduan Administrator - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Administrator untuk Penyimpanan Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 35 halaman. Storage enclosure
Juga untuk Dell PowerVault MD3060e Series: Manual Perangkat Keras dan Perangkat Lunak (25 halaman), Panduan Instalasi (11 halaman), Panduan Memulai (10 halaman), Pembaruan Informasi (8 halaman), Petunjuk Pemasangan Rak (2 halaman), Menyiapkan (2 halaman), Panduan Penyebaran (24 halaman), Panduan Memulai (10 halaman), Panduan Penyebaran (24 halaman), Panduan Pemilik (40 halaman), Panduan Administrator (48 halaman), Menyiapkan (2 halaman)

For EMMs:

It is important to take note of the Enclosure Slot Index and the WWN (worldwide name) columns. These

values will be needed for required command parameters.

Identifying Drawers

To verify the status and number of drives in the drawers of an enclosure, execute the following

command:

secli list drawers -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>

Output

NOTE: Drawer 0 is the top drawer in the enclosure.

When identifying drives, there are additional optional parameters that be can included to narrow the

scope of the drives to obtain information from. Drives can be discovered from the adapter (all down

chain enclosures attached to a specified HBA), all the drives in a specific enclosure, or all the drives in a

specified drawer in a specified enclosure. To get information about all the drives visible to an adapter,

execute the following command:

To get information about all the drives visible to an adapter:

secli list drives -a=<(SASAddress | AdapterIndex)>

Output

For all the drives visible to an adapter: