Dell PowerVault MD3060e Series Administrator's Manual - Page 16

Browse online or download pdf Administrator's Manual for Storage Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 35 pages. Storage enclosure
Also for Dell PowerVault MD3060e Series: Hardware And Software Manual (25 pages), Installation Manual (11 pages), Getting Started Manual (10 pages), Information Update (8 pages), Rack Installation Instructions (2 pages), Setting Up (2 pages), Deployment Manual (24 pages), Getting Started Manual (10 pages), Deployment Manual (24 pages), Owner's Manual (40 pages), Administrator's Manual (48 pages), Setting Up (2 pages)

Print Page

For EMMs:

It is important to take note of the Enclosure Slot Index and the WWN (worldwide name) columns. These

values will be needed for required command parameters.

Identifying Drawers

To verify the status and number of drives in the drawers of an enclosure, execute the following

command:

secli list drawers -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>

Output

NOTE: Drawer 0 is the top drawer in the enclosure.

When identifying drives, there are additional optional parameters that be can included to narrow the

scope of the drives to obtain information from. Drives can be discovered from the adapter (all down

chain enclosures attached to a specified HBA), all the drives in a specific enclosure, or all the drives in a

specified drawer in a specified enclosure. To get information about all the drives visible to an adapter,

execute the following command:

To get information about all the drives visible to an adapter:

secli list drives -a=<(SASAddress | AdapterIndex)>

Output

For all the drives visible to an adapter: