Dell PowerVault MD3060e Series Administrator's Manual - Page 18

Browse online or download pdf Administrator's Manual for Storage Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 35 pages. Storage enclosure
Also for Dell PowerVault MD3060e Series: Hardware And Software Manual (25 pages), Installation Manual (11 pages), Getting Started Manual (10 pages), Information Update (8 pages), Rack Installation Instructions (2 pages), Setting Up (2 pages), Deployment Manual (24 pages), Getting Started Manual (10 pages), Deployment Manual (24 pages), Owner's Manual (40 pages), Administrator's Manual (48 pages), Setting Up (2 pages)

Print Page
Dell PowerVault MD3060e Series Administrator's Manual

Updating EMM Firmware

1.
Download the latest firmware package from dell.com/support.
2.
Stop all I/O between the server and the attached enclosure(s) containing the EMM(s) you intend to
update.
NOTE: Once this update process begins, you may lose access to the drives or enclosures
connected to the update target. The EMM does not respond to commands again until it is back
online.
NOTE: If you have one or more storage enclosures in a daisy-chain, it is recommended to
update the EMM's starting in the lowest tier of the chain and working back up to the top
enclosure.
3.
Run the following command:
secli update emm -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)> -
emm=<(WWN | EMMIndex)> -file=<FW.FilePath>
NOTE: The progress of the firmware transfer is indicated in the console.
4.
The EMM updates the firmware and reboots.
NOTE: This process may take up to 5 minutes.
18