Dell PowerVault MD3060e Series Administrator's Manual - Page 17

Browse online or download pdf Administrator's Manual for Storage Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 35 pages. Storage enclosure
Also for Dell PowerVault MD3060e Series: Hardware And Software Manual (25 pages), Installation Manual (11 pages), Getting Started Manual (10 pages), Information Update (8 pages), Rack Installation Instructions (2 pages), Setting Up (2 pages), Deployment Manual (24 pages), Getting Started Manual (10 pages), Deployment Manual (24 pages), Owner's Manual (40 pages), Administrator's Manual (48 pages), Setting Up (2 pages)

Print Page

To get information about all the drives in a specific enclosure:

secli list drives -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>

Output

For all the drives in a specific enclosure:

To get information about all the drives in a drawer within an enclosure

secli list drives -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)> -

w=<DrawerIndex>

Output

For all the drives in a drawer within an enclosure:

The relevant information to record from the list drives command are the Enclosure Slot Index and

the WWN (Worldwide Name). These values are needed in order to perform actions on a specific drive

such as updating the firmware or blinking the drive.

Updating Drives

Download the latest firmware package from dell.com/support.

Stop all I/O between the server and the attached enclosure(s) containing the drive(s) you intend to

update.

Run the following command:

secli update drive -a=<(SASAddress | AdapterIndex)> -enc=<(WWN |

EnclIndex)> -w=<DrawerIndex> -d=<(WWN | EnclosureSlotIndex |

DrawerSlotIndex)> -file=<FW.FilePath>

NOTE: If the firmware file path contains spaces, enclose the filepath in quotes ("") . For example,

–file="C:\My Files\my firmware.fwh".

NOTE: Only firmware files with the .fwh extension are supported for updating drives using the

secli.

A message prompts you about success or failure of the drive firmware update.