Dell PowerVault MD3060e Series 관리자 매뉴얼 - 페이지 17

{카테고리_이름} Dell PowerVault MD3060e Series에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3060e Series 35 페이지. Storage enclosure
Dell PowerVault MD3060e Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (24 페이지), 시작하기 매뉴얼 (10 페이지), 배포 매뉴얼 (24 페이지), 소유자 매뉴얼 (40 페이지), 관리자 매뉴얼 (48 페이지), 설정 (2 페이지)

To get information about all the drives in a specific enclosure:

secli list drives -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)>

Output

For all the drives in a specific enclosure:

To get information about all the drives in a drawer within an enclosure

secli list drives -a=<(SASAddress | AdapterIndex)> -enc=<(WWN | EnclIndex)> -

w=<DrawerIndex>

Output

For all the drives in a drawer within an enclosure:

The relevant information to record from the list drives command are the Enclosure Slot Index and

the WWN (Worldwide Name). These values are needed in order to perform actions on a specific drive

such as updating the firmware or blinking the drive.

Updating Drives

Download the latest firmware package from dell.com/support.

Stop all I/O between the server and the attached enclosure(s) containing the drive(s) you intend to

update.

Run the following command:

secli update drive -a=<(SASAddress | AdapterIndex)> -enc=<(WWN |

EnclIndex)> -w=<DrawerIndex> -d=<(WWN | EnclosureSlotIndex |

DrawerSlotIndex)> -file=<FW.FilePath>

NOTE: If the firmware file path contains spaces, enclose the filepath in quotes ("") . For example,

–file="C:\My Files\my firmware.fwh".

NOTE: Only firmware files with the .fwh extension are supported for updating drives using the

secli.

A message prompts you about success or failure of the drive firmware update.