Dell PowerVault MD3060e Series 관리자 매뉴얼 - 페이지 15

{카테고리_이름} Dell PowerVault MD3060e Series에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3060e Series 35 페이지. Storage enclosure
Dell PowerVault MD3060e Series에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 배포 매뉴얼 (24 페이지), 시작하기 매뉴얼 (10 페이지), 배포 매뉴얼 (24 페이지), 소유자 매뉴얼 (40 페이지), 관리자 매뉴얼 (48 페이지), 설정 (2 페이지)

Managing Your Storage Enclosure

To keep the EMM firmware and drives up-to-date, there are specific commands and procedures that

need to be executed. There are key commands that present crucial information needed for other

command to be executed properly.

NOTE: Ensure the console window is able to fit at least 150 characters per line to view the output

properly.

Many secli commands require a respective adapter as an input parameter. To get the proper values for

this parameter, execute the following command:

secli list adapters

The following output is displayed.

It is important to take note and record the values presented in the # column as this represents the

Adapter Index and also the SAS Addresses column for the respective supported HBA's.

Identifying Enclosures

For other management actions, you must provide information for a respective enclosure or EMM. These

values are presented with respect to a specific adapter value provided.

To identify the attached enclosures to a specific adapter, execute the following command:

secli list enclosures -a=<(SASAddress | AdapterIndex)>

Output

For enclosures:

Identifying EMMs

To identify the attached EMM's to a specific adapter, execute the following command:

secli list emms -a=<(SASAddress | AdapterIndex)>