- ページ 15

ストレージ Dell PowerVault MD3060e SeriesのPDF 管理者マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3060e Series 35 ページ。 Storage enclosure
Dell PowerVault MD3060e Series にも: ハードウェアとソフトウェアのマニュアル (25 ページ), インストレーション・マニュアル (11 ページ), スタートマニュアル (10 ページ), 情報更新 (8 ページ), ラック取り付け説明書 (2 ページ), セッティング (2 ページ), 配備マニュアル (24 ページ), スタートマニュアル (10 ページ), 配備マニュアル (24 ページ), オーナーズマニュアル (40 ページ), 管理者マニュアル (48 ページ), セッティング (2 ページ)

Dell PowerVault MD3060e Series 管理者マニュアル

Managing Your Storage Enclosure

To keep the EMM firmware and drives up-to-date, there are specific commands and procedures that
need to be executed. There are key commands that present crucial information needed for other
command to be executed properly.
NOTE: Ensure the console window is able to fit at least 150 characters per line to view the output
properly.

Identifying Installed HBAs

Many secli commands require a respective adapter as an input parameter. To get the proper values for
this parameter, execute the following command:
secli list adapters
The following output is displayed.
It is important to take note and record the values presented in the # column as this represents the
Adapter Index and also the SAS Addresses column for the respective supported HBA's.

Identifying Enclosures and EMMs

Identifying Enclosures
For other management actions, you must provide information for a respective enclosure or EMM. These
values are presented with respect to a specific adapter value provided.
To identify the attached enclosures to a specific adapter, execute the following command:
secli list enclosures -a=<(SASAddress | AdapterIndex)>
Output
For enclosures:
Identifying EMMs
To identify the attached EMM's to a specific adapter, execute the following command:
secli list emms -a=<(SASAddress | AdapterIndex)>
15