Dell PowerVault MD3060e Series Yönetici El Kitabı - Sayfa 15

Depolama Dell PowerVault MD3060e Series için çevrimiçi göz atın veya pdf Yönetici El Kitabı indirin. Dell PowerVault MD3060e Series 35 sayfaları. Storage enclosure
Ayrıca Dell PowerVault MD3060e Series için: Donanım ve Yazılım Kılavuzu (25 sayfalar), Kurulum Kılavuzu (11 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Bilgi Güncellemesi (8 sayfalar), Raf Kurulum Talimatları (2 sayfalar), Kurulum (2 sayfalar), Dağıtım Kılavuzu (24 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Dağıtım Kılavuzu (24 sayfalar), Kullanıcı El Kitabı (40 sayfalar), Yönetici El Kitabı (48 sayfalar), Kurulum (2 sayfalar)

Managing Your Storage Enclosure

To keep the EMM firmware and drives up-to-date, there are specific commands and procedures that

need to be executed. There are key commands that present crucial information needed for other

command to be executed properly.

NOTE: Ensure the console window is able to fit at least 150 characters per line to view the output

properly.

Many secli commands require a respective adapter as an input parameter. To get the proper values for

this parameter, execute the following command:

secli list adapters

The following output is displayed.

It is important to take note and record the values presented in the # column as this represents the

Adapter Index and also the SAS Addresses column for the respective supported HBA's.

Identifying Enclosures

For other management actions, you must provide information for a respective enclosure or EMM. These

values are presented with respect to a specific adapter value provided.

To identify the attached enclosures to a specific adapter, execute the following command:

secli list enclosures -a=<(SASAddress | AdapterIndex)>

Output

For enclosures:

Identifying EMMs

To identify the attached EMM's to a specific adapter, execute the following command:

secli list emms -a=<(SASAddress | AdapterIndex)>