Dell PowerVault MD3220 Series Panduan Penyebaran - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Penyimpanan Dell PowerVault MD3220 Series. Dell PowerVault MD3220 Series 38 halaman. Storage arrays
Juga untuk Dell PowerVault MD3220 Series: Manual Pembaruan (32 halaman), Petunjuk Pemasangan Rak (2 halaman), Panduan Pengguna (46 halaman), Panduan Penyebaran (38 halaman), Pembaruan Informasi (1 halaman), Buku Panduan Teknis (40 halaman), Panduan Penyebaran (38 halaman)

Halaman Cetak
Dell PowerVault MD3220 Series Panduan Penyebaran
4 Stop all I/O and turn off the system.
5 Cable the expansion enclosure(s) to the storage array.
6 Turn on attached units:
7 After the PowerVault MD1200 Series expansion enclosure is configured as
After the PowerVault MD1200 Series expansion enclosures are online, they
can be accessed as a part of the storage array.
Downloaded from
www.Manualslib.com
Using MDSM, update the storage array RAID controller module
b
firmware and NVSRAM to the latest versions available at
support.dell.com. In the Enterprise Management Window (EMW),
Click Tools Upgrade RAID Controller Module Firmware.
Stop all I/O to the array and turn off the host systems attached to the
a
storage array.
Turn off the storage array.
b
Turn off the expansion enclosure(s) in the affected system.
c
Turn on the expansion enclosure(s). Wait for the enclosure status
a
LED to light blue.
Turn on the storage array and wait for the status LED to indicate that
b
the unit is ready:
•
If the status LEDs light solid amber, the storage array is still
coming online.
•
If the status LEDs are blinking amber, there is an error that can be
viewed using the MDSM.
•
If the status LEDs light solid blue, the storage array is ready.
After the storage array is online and ready, turn on any attached host
c
systems.
an expansion enclosure of the storage array, restore the data that was
backed up in step 1.
manuals search engine
Hardware Installation
21