- ページ 21
ストレージ Dell PowerVault MD3220 SeriesのPDF 配備マニュアルをオンラインで閲覧またはダウンロードできます。Dell PowerVault MD3220 Series 38 ページ。 Storage arrays
Dell PowerVault MD3220 Series にも： 更新マニュアル (32 ページ), ラック取り付け説明書 (2 ページ), ユーザーマニュアル (46 ページ), 配備マニュアル (38 ページ), 情報更新 (1 ページ), テクニカルマニュアルブック (40 ページ), 配備マニュアル (38 ページ)
ページを印刷する
4 Stop all I/O and turn off the system.
5 Cable the expansion enclosure(s) to the storage array.
6 Turn on attached units:
7 After the PowerVault MD1200 Series expansion enclosure is configured as
After the PowerVault MD1200 Series expansion enclosures are online, they
can be accessed as a part of the storage array.
Downloaded from
www.Manualslib.com
Using MDSM, update the storage array RAID controller module
b
firmware and NVSRAM to the latest versions available at
support.dell.com. In the Enterprise Management Window (EMW),
Click Tools Upgrade RAID Controller Module Firmware.
Stop all I/O to the array and turn off the host systems attached to the
a
storage array.
Turn off the storage array.
b
Turn off the expansion enclosure(s) in the affected system.
c
Turn on the expansion enclosure(s). Wait for the enclosure status
a
LED to light blue.
Turn on the storage array and wait for the status LED to indicate that
b
the unit is ready:
•
If the status LEDs light solid amber, the storage array is still
coming online.
•
If the status LEDs are blinking amber, there is an error that can be
viewed using the MDSM.
•
If the status LEDs light solid blue, the storage array is ready.
After the storage array is online and ready, turn on any attached host
c
systems.
an expansion enclosure of the storage array, restore the data that was
backed up in step 1.
manuals search engine
Hardware Installation
21