Dell PowerVault MD3260 Series Panduan Konfigurasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Dell PowerVault MD3260 Series. Dell PowerVault MD3260 Series 17 halaman. Dell powervault md3260/3260i/3660i/3660f/3060e storage arrays
Juga untuk Dell PowerVault MD3260 Series: Manual Perangkat Keras dan Perangkat Lunak (25 halaman), Panduan Instalasi (11 halaman), Panduan Memulai (10 halaman), Pembaruan Informasi (8 halaman), Petunjuk Pemasangan Rak (2 halaman), Menyiapkan (2 halaman), Panduan Penyebaran (26 halaman), Panduan Penyebaran (24 halaman), Panduan Memulai (9 halaman)

Figure 7. Four Host Servers With Single-Port HBAs Connected to a Dual-Controller (Duplex) Storage Array Using Cluster Cabling

Figure 7 shows a four-cluster node connected to two RAID controller modules. Since each cluster node has redundant

paths, loss of a single path still allows access to the storage array through the alternate path.

SAN-Attached Cabling

SAN-attached cabling configurations provide the highest level of redundancy and alternate-path connectivity between

the host server and storage array. A SAN configuration using a Fibre Channel compatible switch fabric allows you to

establish multiple redundant paths to data on the storage array.

NOTE: A SAN configuration using a supported Fibre Channel switch hardware is required if the Remote Replication

premium feature is activated on the storage array. Remote Replication is not supported in a direct-attached

configuration. For specific cabling requirements for Remote Replication, see Remote Replication Cabling Example.

SAN-Attached Cabling Example

The following figure shows a three-server, mixed HBA cabling configuration that uses two separate switch fabrics to

establish multiple paths to the storage array. Port-to-port connections in each switch fabric/zone are detailed in the text

boxes.