Dell PowerVault MD3660i Series Storage Array Panduan Pemecahan Masalah - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Penyimpanan Dell PowerVault MD3660i Series Storage Array. Dell PowerVault MD3660i Series Storage Array 18 halaman. Storage arrays
Juga untuk Dell PowerVault MD3660i Series Storage Array: Manual Perangkat Keras dan Perangkat Lunak (25 halaman), Panduan Instalasi (11 halaman), Panduan Memulai (10 halaman), Pembaruan Informasi (8 halaman), Petunjuk Pemasangan Rak (2 halaman), Menyiapkan (2 halaman), Panduan Pemecahan Masalah (20 halaman), Panduan Penyebaran (24 halaman)

Managing the MD-Series Storage Array

One of the most critical issues in establishing an efficient storage management architecture is placing

data traffic and management traffic on the proper networks. When setting up management on any Dell

PowerVault MD-Series storage array, Dell recommends that you always separate management traffic

from the server-to-storage array data path using different subnetworks, or subnets.

This management method is commonly called out-of-band management.

Out-of-band management prevents traffic on the Ethernet management ports of your storage array

from interfering with critical data I/O between the storage array and server. While in-band

management − routing management traffic and data I/O on the same data path − is supported on the

MD storage array, it will likely result in an across-the-board reduction in performance and/or

throughout.

Dell PowerVault MD Storage Manager is a graphically based tool that allows you to fully manage,

configure and provision your MD-series storage arrays.

To set up your Ethernet management port in MD Storage Manager:

Launch MD Storage Manager



From the Setup tab, choose Configure Ethernet Management Ports



Using the Change Network Configuration wizard, enter the port and IP address information for the

management port on both RAID controller modules.