Dell PowerVault MD3660i Series Storage Array Panduan Pemecahan Masalah - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Penyimpanan Dell PowerVault MD3660i Series Storage Array. Dell PowerVault MD3660i Series Storage Array 18 halaman. Storage arrays
Juga untuk Dell PowerVault MD3660i Series Storage Array: Manual Perangkat Keras dan Perangkat Lunak (25 halaman), Panduan Instalasi (11 halaman), Panduan Memulai (10 halaman), Pembaruan Informasi (8 halaman), Petunjuk Pemasangan Rak (2 halaman), Menyiapkan (2 halaman), Panduan Pemecahan Masalah (20 halaman), Panduan Penyebaran (24 halaman)

existing management view in MD Storage Manager.

Perform these steps:

1. Obtain the IP address of the RAID controller

you are adding. If the IP address is unknown,

see Using a Serial Cable to Configure Your

Management Port.

2. Start MD Storage Manager and select the MD

storage array containing the RAID controller.

3. From the Setup tab in the Array

Management Window, select Add Storage

Arrays.

4. In the Select Addition Method, select

Manual.

5. In the Add New Storage Array window,

select Out-of-Band management and enter

the IP address of the RAID controller.

6. Click Add.

If you are adding a single RAID controller

module or a new path to a management

port, a confirmation message appears.

7. Select Yes.

The new path and the existing path are

automatically merged.