Dell PowerVault MD3660i Series Storage Array 문제 해결 매뉴얼 - 페이지 18

{카테고리_이름} Dell PowerVault MD3660i Series Storage Array에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3660i Series Storage Array 18 페이지. Storage arrays
Dell PowerVault MD3660i Series Storage Array에 대해서도 마찬가지입니다: 하드웨어 및 소프트웨어 매뉴얼 (25 페이지), 설치 매뉴얼 (11 페이지), 시작하기 매뉴얼 (10 페이지), 정보 업데이트 (8 페이지), 랙 설치 지침 (2 페이지), 설정 (2 페이지), 문제 해결 매뉴얼 (20 페이지), 배포 매뉴얼 (24 페이지)

Dell PowerVault MD3660i Series Storage Array 문제 해결 매뉴얼
existing management view in MD Storage Manager.
Perform these steps:
1. Obtain the IP address of the RAID controller
you are adding. If the IP address is unknown,
see Using a Serial Cable to Configure Your
Management Port.
2. Start MD Storage Manager and select the MD
storage array containing the RAID controller.
3. From the Setup tab in the Array
Management Window, select Add Storage
Arrays.
4. In the Select Addition Method, select
Manual.
5. In the Add New Storage Array window,
select Out-of-Band management and enter
the IP address of the RAID controller.
6. Click Add.
If you are adding a single RAID controller
module or a new path to a management
port, a confirmation message appears.
7. Select Yes.
The new path and the existing path are
automatically merged.