Dell PowerVault NX1950 Panduan Penyebaran - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Penyimpanan Dell PowerVault NX1950. Dell PowerVault NX1950 34 halaman. For vmware esx server software
Juga untuk Dell PowerVault NX1950: Panduan Informasi Penting (26 halaman), Memulai (49 halaman), Panduan Instalasi dan Pemecahan Masalah (48 halaman), Panduan Penyebaran (38 halaman), Panduan Peningkatan (18 halaman), Panduan Referensi (4 halaman), Menyiapkan (2 halaman), Menggunakan (2 halaman), Panduan Konfigurasi (11 halaman)

If you are using the Dell PowerEdge Installation and Server Management

CD on your system for the first time, perform the following steps:

When prompted, click the appropriate language for your system.

The Dell Software License Agreement window appears. Read the

information carefully.

If you agree with all of the information, click Accept to continue.

If you do not agree with all the information, click Decline. Your

system restarts, and you will not able to complete the operating

system installation.

5 Click Server Setup to install the operating system.

The Set the Date and Time window appears.

6 Select the appropriate date, time, and time zone, and click Continue.

7 Select Microsoft Windows Server 2003 x64 Edition.

NOTE:

Server Administrator does not provide an option for the Windows

Unified Data Storage Server 2003 x64 operating system. Selecting

Microsoft Windows Server 2003 x64 Edition is the correct option.

NOTE:

Since the PID is included on the operating system DVD, providing

your PID is not required. You are prompted to enter a PID during the

Server Administrator installation if you use Dell OpenManage 5.0 or later.

8 Click Continue.

The Configure the Hard Drive for Microsoft window appears.

9 The Configure or Skip RAID window appears. Perform the following

steps:

Select one of the following options, and then click Continue:

•

Configure RAID

•

Skip RAID configuration

NOTE:

Your system was pre-configured with hardware RAID1 using both

the internal hard disk drives, and this is the supported hardware

configuration for your system.

If you selected Skip RAID configuration, go to step 10.

Deployment Guide