Dell PowerVault NX1950 배포 매뉴얼 - 페이지 22

{카테고리_이름} Dell PowerVault NX1950에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault NX1950 34 페이지. For vmware esx server software
Dell PowerVault NX1950에 대해서도 마찬가지입니다: 중요 정보 매뉴얼 (26 페이지), 시작하기 (49 페이지), 설치 및 문제 해결 매뉴얼 (48 페이지), 배포 매뉴얼 (38 페이지), 업그레이드 매뉴얼 (18 페이지), 참조 매뉴얼 (4 페이지), 설정 (2 페이지), 사용 (2 페이지), 구성 매뉴얼 (11 페이지)

If you are using the Dell PowerEdge Installation and Server Management

CD on your system for the first time, perform the following steps:

When prompted, click the appropriate language for your system.

The Dell Software License Agreement window appears. Read the

information carefully.

If you agree with all of the information, click Accept to continue.

If you do not agree with all the information, click Decline. Your

system restarts, and you will not able to complete the operating

system installation.

5 Click Server Setup to install the operating system.

The Set the Date and Time window appears.

6 Select the appropriate date, time, and time zone, and click Continue.

7 Select Microsoft Windows Server 2003 x64 Edition.

NOTE:

Server Administrator does not provide an option for the Windows

Unified Data Storage Server 2003 x64 operating system. Selecting

Microsoft Windows Server 2003 x64 Edition is the correct option.

NOTE:

Since the PID is included on the operating system DVD, providing

your PID is not required. You are prompted to enter a PID during the

Server Administrator installation if you use Dell OpenManage 5.0 or later.

8 Click Continue.

The Configure the Hard Drive for Microsoft window appears.

9 The Configure or Skip RAID window appears. Perform the following

steps:

Select one of the following options, and then click Continue:

•

Configure RAID

•

Skip RAID configuration

NOTE:

Your system was pre-configured with hardware RAID1 using both

the internal hard disk drives, and this is the supported hardware

configuration for your system.

If you selected Skip RAID configuration, go to step 10.

Deployment Guide