Dell POWERCONNECT 5548P Catatan Rilis - Halaman 8

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih Dell POWERCONNECT 5548P. Dell POWERCONNECT 5548P 15 halaman. Powerconnect 5500 series
Juga untuk Dell POWERCONNECT 5548P: Panduan Memulai (20 halaman)

Halaman Cetak
Dell POWERCONNECT 5548P Catatan Rilis

Documentation Updates

This document lists the changes from the PowerConnect 5524/5548/5524P/5548P Systems CLI and User's Guide.
The modifications are due to instances discovered in various user environments.
Summary
Adding clarification to Voice
VLAN enable command
Adding clarification to Voice
VLAN Port Setting page
Clarification about interface
switchport customer mode (QinQ)

Issues Resolved in Previous Versions

The following is a list of issues resolved between 4.1.0.12 and 4.1.0.15 in firmware release
Description
Stacking unit does not always
rejoin stack after master failover
HTTP login fail if password is
longer than 20 characters
The following is a list of issues resolved between 4.1.0.10 and 4.1.0.12 firmware release.
Description
Wrong value used for chassis
Service Tag
System Firmware Version 4.1.0.16
PowerConnect 5500 Series Release Notes
Description
Adding clarification to user guideline and CLI
example for command "voice vlan enable" –
Voice VLAN cannot be enabled on interface, if
interface is static member of the voice VLAN.
Adding clarification to Voice VLAN Port Setting
section (page 503) - – Voice VLAN cannot be
enabled on interface, if interface is static
member of the voice VLAN.
Clarifying in "interface switchport mode"
command that customer mode setting is part
of QinQ tagging.
User Impact
Traffic does not flow properly through some
units of the stack
User is denied access management via http, in
such a case
User Impact
MIB – switch reports switch Service Tag as
Chassis Service tag. However – device is not
designed to be included in a chassis
Subject to Change Without Notice
Relevant Documents
CLI guide
User Guide
CLI guide
Resolution
Issue resolved
Issue resolved
Resolution
Chassis Service Tag is now
set to NULL.
Page 5