Dell POWERCONNECT 5548P 릴리스 정보 - 페이지 8
{카테고리_이름} Dell POWERCONNECT 5548P에 대한 릴리스 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell POWERCONNECT 5548P 15 페이지. Powerconnect 5500 series
Dell POWERCONNECT 5548P에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (20 페이지)
페이지 인쇄
Documentation Updates
This document lists the changes from the PowerConnect 5524/5548/5524P/5548P Systems CLI and User's Guide.
The modifications are due to instances discovered in various user environments.
Summary
Adding clarification to Voice
VLAN enable command
Adding clarification to Voice
VLAN Port Setting page
Clarification about interface
switchport customer mode (QinQ)
Issues Resolved in Previous Versions
The following is a list of issues resolved between 4.1.0.12 and 4.1.0.15 in firmware release
Description
Stacking unit does not always
rejoin stack after master failover
HTTP login fail if password is
longer than 20 characters
The following is a list of issues resolved between 4.1.0.10 and 4.1.0.12 firmware release.
Description
Wrong value used for chassis
Service Tag
System Firmware Version 4.1.0.16
PowerConnect 5500 Series Release Notes
Description
Adding clarification to user guideline and CLI
example for command "voice vlan enable" –
Voice VLAN cannot be enabled on interface, if
interface is static member of the voice VLAN.
Adding clarification to Voice VLAN Port Setting
section (page 503) - – Voice VLAN cannot be
enabled on interface, if interface is static
member of the voice VLAN.
Clarifying in "interface switchport mode"
command that customer mode setting is part
of QinQ tagging.
User Impact
Traffic does not flow properly through some
units of the stack
User is denied access management via http, in
such a case
User Impact
MIB – switch reports switch Service Tag as
Chassis Service tag. However – device is not
designed to be included in a chassis
Subject to Change Without Notice
Relevant Documents
CLI guide
User Guide
CLI guide
Resolution
Issue resolved
Issue resolved
Resolution
Chassis Service Tag is now
set to NULL.
Page 5