Dell PowerSwitch E3200-ON Series Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih Dell PowerSwitch E3200-ON Series. Dell PowerSwitch E3200-ON Series 10 halaman.

These instructions explain the external power supply (EPS) installation for the Dell PowerSwitch N2200-ON and N3200-ON/

E3200-ON full-width and half-width switches. You can use the optional EPS on a desktop, wall mount, or in a rack.

● The model name of the EPS Shelf with one PSU is MPS-1S.

● The model name of the EPS Shelf with three PSUs is MPS-3S.

NOTE:

For switch installation instructions, see the switch-specific Dell PowerSwitch Installation Guide at

support.

Regulatory models

● Model number E51W

● RTN: E51W001 for one slot

● RTN: E51W003 for three slots

Document revision history

Table 1. Revision history

Revision

Date

A02

2022-09

A01

2021-04

A00

2020–01

Topics:

•

•

MPS-1S two-post installation

•

MPS-3S two-post installation

•

MPS-1S wall mount

•

Important information

Desktop mount

To use the EPS on a desktop, first attach the four small rubber feet to the underside of the switch.

1. Locate the four rubber feet shipped with the EPS.

2. Remove the paper backing on the bottom of one of the rubber feet.

3. Adhere the rubber foot to one of the four round position marks on the underside of the switch.

4. Repeat the process for the remaining three rubber feet.

N-Series EPS installation

Description

Updated to include the E3200-ON Series switches.

Minor corrections to the MPS-1S wall mount section.

Initial release.

www.dell.com/

N-Series EPS installation