Dell S3100 Series Panduan Memulai - Halaman 32

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Dell S3100 Series. Dell S3100 Series 46 halaman.
Juga untuk Dell S3100 Series: Panduan Instalasi (45 halaman), Panduan Memulai (27 halaman)

Halaman Cetak

1. Reset Button
2. Accessing the Console
3. Navigating Cli Modes
4. Installing the Software
5. Default Configuration
6. Creating a Port-Based Vlan
7. Connect the System to the Network

Figure 23. Installing the Switch in a Two-Post Center-Mount Configuration

Configuring a Four-Post Thread

To install your switch in a four-post thread configuration, follow these steps.

For this configuration, remove the flange ear castings from each end of the ReadyRails assemblies.

To remove the two screws from each flange ear and remove each casting, use a Torx driver. See

item 1 in the following illustration. Retain the castings for future rack requirements.

For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at

each end. See item 2 in the following illustration.

Installation