Christie CP4230 Lembar Instruksi

Jelajahi secara online atau unduh pdf Lembar Instruksi untuk Rak dan Dudukan Christie CP4230. Christie CP4230 10 halaman. Christie rack mount pedestal
Juga untuk Christie CP4230: Lembar Instruksi (6 halaman), Buletin Teknis (6 halaman), Buletin Teknis (8 halaman), Setup Manual (3 halaman), Panduan Instalasi dan Pengaturan (19 halaman)

INTRODUCTION

These instructions explain how to adjust convergence in the CP4220 and CP4230 projectors.

Information provided here supplements the main Convergence Instructions drawing provided inside

the top lid of the projector.

TOOLS REQUIRED

• 2.5 mm driver with heat-shrink tubing (2.0 inch and 6.5 inch lengths), included with projector. One

driver is located on the the high security lid and the other is located in the packaging.

INSTRUCTIONS

WARNING

ACCESSING THE LIGHT ENGINE

Remove the top lid to access to the light engine and liquid cooling system compartments.

Convergence Instruction Sheet

020-100703-01 Rev. 1 (05-2011)

CP4220/4230 Convergence

Convergence adjustment must be performed by a qualified service technician.

Instruction Sheet

1 of 10