Christie CP4230 Lembar Instruksi - Halaman 3

Jelajahi secara online atau unduh pdf Lembar Instruksi untuk Rak dan Dudukan Christie CP4230. Christie CP4230 10 halaman. Christie rack mount pedestal
Juga untuk Christie CP4230: Lembar Instruksi (6 halaman), Buletin Teknis (6 halaman), Buletin Teknis (8 halaman), Setup Manual (3 halaman), Panduan Instalasi dan Pengaturan (19 halaman)

CONVERGENCE OVERVIEW

NOTICE! Do not run the projector while performing convergence with the Light

Engine Fan Pack or the Cooling Duct removed. This will cause overheating of the

Satellite Formatter Board FPGA's. However, the fan packs can be removed for a short

time to access the adjustment screws. If this is necessary you can verify the

temperature at the TPC status window.

The projector has three separate DMD panels to produce three separate red, green and blue image

components. To get the most accurate color representation across the whole image it is essential the

three panels are perfectly aligned so that all pixels line up. The following convergence procedure

outlines how to achieve this.

Convergence Instruction Sheet

020-100703-01 Rev. 1 (05-2011)

Figure 3

3 of 10