Allmand Night-Lite E Series Panduan Operator - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Pencahayaan Allmand Night-Lite E Series. Allmand Night-Lite E Series 20 halaman. Portable light tower

Halaman Cetak

Specifications

Overall Dimensions
Length (Transport
position)
Width (Transport
position)
Height (Transport
position)
Ground Clearance 6 in (15,2 cm)
Height (Tower
Extended)
Width (Outriggers
deployed)
Length (Outriggers
deployed)
Unit Weight
Wind Speed
Frequency (Hz)
Volts
Amps

Troubleshooting

Before performing any troubleshooting
procedures, read Safety.
WARNING
Burn Hazard
• The light fixtures become extremely
hot during use.
• Always use caution and heat–resis-
tant glove when handling the lights
or allow the lights to sufficiency cool
down before handling.
18
45 in (114,3 cm)
32 in (81,3 cm)
89 in (226,1 cm)
273 in (693,4 cm)
64 in (162,6 cm)
70 in (177,8 cm)
720 lbs (325 kg)
50 mph (80 km/h)
60
120
14
Troubleshooting Chart
Problem
Possible Cause
Lights / elec-
No power. Make sure
tric winch
power cord is connected
not operable
between unit and 120-
volt supply.
Main breaker off. Turn on
main breaker.
No light (one
Light switch(es) off. Turn
or more
on light switch(es).
lights)
Tower / Light switch in
Tower position. Turn
switch to Light position.
Photocell /
Light Operation Mode
Timer and
not set correctly. See
Manual
Light Operation Mode.
control not
working
Photocell
Too little ambient light.
stays on or
Make sure that noth-
does not
ing is blocking pho-
function
tocell. See Photocell
properly
Operation. Or switch to
Timer or Manual control.
Low voltage. Power
cord gauge too small or
length too long.
Photocell
Too much ambient light.
stays off or
Move away from light,
does not
or switch to Timer or
function
Manual control.
properly
Electric
Tower / Light switch
winch not
in Light position. Turn
working
switch to Tower position.
Unit not
Unit malfunction. Contact
working
authorized dealer.
www.allmand.com