Miele AWG 102 Panduan Petunjuk Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kap Ventilasi Miele AWG 102. Miele AWG 102 28 halaman. External motor roof installation
Juga untuk Miele AWG 102: Panduan Pengoperasian dan Instalasi (24 halaman), Petunjuk Pengoperasian dan Pemasangan (28 halaman), Panduan Petunjuk Instalasi (28 halaman)

Installation

DDG 102

The DDG 102 is designed for

installation on an angled tile, slate or

shingle roof. The slope of the roof must

be at least 22° to prevent the ingress of

the elements, such as rain or snow.

Consult a roof tiler or roof plumber for

advice regarding other types of roofing.

Installation on a flat roof is not

possible.

Installation must only be carried out

by a qualified and competent person.

The external motor is connected to the

rangehood by means of a control cable

and is operated by the controls on the

rangehood.

Please refer to the operating and

installation instructions for the

rangehood before installing the

external motor and ducting.

The ducting collar on the external motor

has a diameter of 125 mm when the

appliance is supplied.

 If exhaust ducting with a diameter of

 150 mm is required, the front ring

of the collar must be cut at the join

with a sharp knife.