Miele DA 2250 Panduan Pengguna - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kap Ventilasi Miele DA 2250. Miele DA 2250 40 halaman. Cooker
Juga untuk Miele DA 2250: Panduan Pengoperasian dan Instalasi (40 halaman), Petunjuk Pengoperasian dan Pemasangan (40 halaman)

Cleaning and care

Changing a halogen lamp

Before any cleaning or maintenance

work is carried out, disconnect the

cooker hood from the mains supply.

Ensure that:

– it is switched off at the isolator, or

– it is switched off at the wall

socket and the plug removed, or

– the fuse is withdrawn from the

fused spur connection unit, or

– the mains fuse is withdrawn, or

– the screw-out fuse is removed

(in countries where this is

applicable).

^ Remove the grease filter.

^ Remove the charcoal filters if the

cooker hood is being used in

recirculation mode.

Exercise caution when changing

halogen lamps. They get very hot

during use, and remain hot for some

time after being switched off.

Do not touch the surface directly

when changing a lamp, as grease

particles from your fingers will

adhere to the surface and damage

it. Please follow the manufacturer's

instructions.

^ Push down the lighting unit slightly

via the opening in the safety panel.

^ The halogen lamp is now accessible

and should be unscrewed

anti-clockwise.

^ Replace it with a new halogen lamp

(specification: GU/GZ 10, 230 V,

50 W). Screw the lamp into the

socket and push it upwards.

We recommend only using lamps of the

same specification and also made by

the same manufacturer as the ones

being replaced.

^ Replace the grease filter and, if being

used in recirculation mode, the

charcoal filters.