Miele DA 3460 Panduan Pengoperasian dan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kap Ventilasi Miele DA 3460. Miele DA 3460 40 halaman. Ventilation system
Juga untuk Miele DA 3460: Panduan Pengoperasian dan Instalasi (40 halaman), Petunjuk Pengoperasian dan Pemasangan (40 halaman), Panduan Petunjuk Instalasi (24 halaman)

Automatically switching back the

intensive power level

The intensive level can be programmed

to automatically switch back to level 3

after 10 minutes.

^ To set this option, the fan and the

overhead lighting must be turned off

and the fume deflector pushed in.

^ Press and hold the "–" and "+" buttons

for approx. 10 seconds until power

level indicator 1 lights up.

^ Then press the following buttons one

after another :

– overhead lighting I,

– the "–" button, and

– overhead lighting I again,

If the indicators 1 and IS flash, the

automatic switch back is not activated.

^ To activate the automatic switch

back, press the "+" button.

The power level indicators 1 and IS

light continuously.

To deactivate, press the "–" button.

^ Press the On/Off button K to confirm.

^ If the procedure is not stored within 4

minutes, the hood will automatically

default to the "old" data.

Automatic Safety Shut-Off

If the ventilation system is left on, the

fan will turn automatically off 10 hours

after the last button was activated. The

lighting however will remain on.

^ Press the On/Off button K to turn the

fan back on again.

Operation