Miele DA 3460 Operating And Installation Manual - Page 11

Browse online or download pdf Operating And Installation Manual for Ventilation Hood Miele DA 3460. Miele DA 3460 40 pages. Ventilation system
Also for Miele DA 3460: Operating And Installation Manual (40 pages), Operating And Installation Instructions (40 pages), Installation Instructions Manual (24 pages)

Miele DA 3460 Operating And Installation Manual
Automatically switching back the
intensive power level
The intensive level can be programmed
to automatically switch back to level 3
after 10 minutes.
^ To set this option, the fan and the
overhead lighting must be turned off
and the fume deflector pushed in.
^ Press and hold the "–" and "+" buttons
for approx. 10 seconds until power
level indicator 1 lights up.
^ Then press the following buttons one
after another :
– overhead lighting I,
– the "–" button, and
– overhead lighting I again,
If the indicators 1 and IS flash, the
automatic switch back is not activated.
^ To activate the automatic switch
back, press the "+" button.
The power level indicators 1 and IS
light continuously.
To deactivate, press the "–" button.
^ Press the On/Off button K to confirm.
^ If the procedure is not stored within 4
minutes, the hood will automatically
default to the "old" data.
Automatic Safety Shut-Off
If the ventilation system is left on, the
fan will turn automatically off 10 hours
after the last button was activated. The
lighting however will remain on.
^ Press the On/Off button K to turn the
fan back on again.
Operation
11