Miele PUR 68 W Petunjuk Pengoperasian dan Pemasangan - Halaman 22

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele PUR 68 W. Miele PUR 68 W 40 halaman. Ventilation system
Juga untuk Miele PUR 68 W: Petunjuk Pengoperasian dan Pemasangan (40 halaman), Petunjuk Pengoperasian dan Pemasangan (40 halaman), Petunjuk Pengoperasian dan Pemasangan (40 halaman), Petunjuk Pengoperasian dan Pemasangan (36 halaman), Petunjuk Pengoperasian dan Pemasangan (40 halaman)

Halaman Cetak
Miele PUR 68 W Petunjuk Pengoperasian dan Pemasangan
Cleaning and care
Cleaning the grease filters by hand
 Clean the filters with a soft nylon
brush in a mild solution of hot water
and a small amount of washing-up li-
quid. Do not use "neat" washing up
liquid.
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
– cleaning agents containing descaling
agents
– powder cleaners, cream cleaners
– aggressive multi-purpose cleaning
agents or spray cleaners for grease
– oven sprays
Cleaning the grease filters in the
dishwasher
 Place the filters as upright as possible
in the lower basket, with the short
sides upright, ensuring the spray arm
is not obstructed.
 Use a standard household dish-
washer detergent.
 Select a dishwasher programme with
a wash temperature between 50°C
and 65°C.
Depending on the dishwasher deter-
gent used, cleaning the filter in a dish-
washer can cause permanent discol-
ouration to the surface. However, this
will not affect the functioning of the fil-
ter in any way.
22
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before repla-
cing them.
 When removing the filters for clean-
ing, also clean off any residues of oil
or fat from the now accessible hous-
ing to prevent the risk of these catch-
ing fire.
 Replace the grease filters, making
sure that the locking clips are facing
down towards the hob.
 If a grease filter is inadvertently re-
placed upside down, insert a small
screwdriver blade into the slit to dis-
engage the clip.